2012 Toyota 4Runner T10 V3.1 Knobless Head Unit Installation
Get the unit here with a 7% discount with the coupon code: Kingsev7
https://cartrimhome.com/Car-Multimedi...\
If you need to connect your head unit to its own fast and reliable internet, get this:
https://www.efleaconnect.com/en/
Use coupon Code: 1kingsev for a 30%off on USB + FREE SIMCARD + FREE SHIPPING and use Coupon code: Kingsev for an extra $5 off of your monthly plan.
IMPORTANT UPDATE;
I found the solution to transfer the video signal from the rearview mirror to the head unit, here are the steps to follow in case you need them:
OEM backup Cam in mirror how to !
Alright to save time
Red PIN 3 Backup signal
Black video (-)
White video (+)
Step 1: Remove ceiling console with the 2 screw in glasses compartment
Step 2: Open mirror wiremold
Step 3: Locate the connector
Step 4: Unplugged it pull all the wiring thru the ceiling console
Step 5: Make the RCA wire go between your ceiling console and your T9/T10 (I went driver pillar)
Step 6: Cut Your RCA wire on the mirror side
Step 7: tap the red wire from your rca ( camera rca with the 12v signal wire) to the RED Pin 3
Yellow to the white wire
Black wire to the black wire
Step 8: Plug everything in your radio (a lot of post of how to reverse cam
Step 9: Test it !
Make sure your are on auto mode. NTSC and PAL work but be safe let it on Auto !
I found this solution in the support Facebook group for this head unit, THEY ARE AMAZING!,
Mr. Sevag Merdinian Head representative of this Product/Service personally made sure that all my questions were answered to satisfaction, here is the link to the support group:
https://www.facebook.com/groups/t4r.a...
DISCLAIMER:
This video is not sponsored, I purchased this head unit with my own money.
#Toyota #4runner #T10V3.1